N2 Cam Belt Stabiliser

NZD$150.00 ex TAX

(2 customer reviews)


MRP N2 Style Cam Belt Stabiliser

Application: 4age/7age suit all models FWD & RWD
Made from Billet 6061 Aluminium Andosied Gun Metal
Idler pulley
All bolts included for installation

This product helps to stabilise the cam belt during rev down. Typically on rev down you will see the cam belt ‘flap’ around. In some extreme cases this can cause the cam belt to jump a tooth. People have made the belt tighter to overcome this issue but in turn this is not good for the belt and the relating rotating parts.
Running the cam belt stabilser will ensure the cam belt stays in place and is ideal for all types of road/race applications.

Fore more details please click the youtube link below

Additional information

Weight 1 kg

2 reviews for N2 Cam Belt Stabiliser

  1. Paul Chinery

    Cam belt whip is eliminated when this is applied. Engine appears to run smoother from having greater control over the exhaust cam and reducing ignition timing error through the distributor.
    Also, the rear alloy piece of the cam cover must be removed.

  2. Chris Jones (verified owner)

    This works nicely, its cheap insurance against a bad day on an interference motor. I ended up trimming the alloy backing plate to clear this and then drilled the plastic cover so it can stick out of it a little bit, this allowed me to continue to run the covers and keep any debris out of the belt system.

Add a review

Your email address will not be published. Required fields are marked *

Post comment