Description
MRP 4age Super H-Beam Conrods
After many years of R&D and real track testing we have developed our own 4age conrods which are designed in house and custom made to our specs, for those wanting to build 4agte or 4age configurations.
These conrods use the stock 4age 42mm bearings and fit 4age floating 20mm gudgen pins.
Specifications
Material: 40Crnimoa (4340) Forged Steel
Hardness: HRC-33-38
Special doweled cap and profiled clearance
Silicon bronze bushings for floating piston wrist pins
Fully machined to produce the lightest and strongest rod possible
Sets weight matched +/- 1.5 grams
ARP 2000 conrod bolts (up to 800hp) – For higher HP rating ARP 625 Series is needed
122mm center to center
HP Rating: 200hp per rod (Total 800hp) and 10,000rpm
490g total weight incl bolts (bolts are 54g)
Special Features
Lipped Cap – Improvement in the big-end integrity by slightly increasing the contact area between the cap and the connecting rod
Oil notch to promote oiling to under side of the piston which aids in cooling and lubrication
Dual oil feed holes for the gudgen pin to aid in lubrication

Thick H Beam design with extra lightening through the surface of the conrod to keep weight to a minimum
All edges of the H beam are rounded to relieve stress for a stronger conrod




Reviews
There are no reviews yet.